Joints Standard

Short Detail

---

Description
Seramika Standard is a cement based grouting compound for interior
and exterior use with ceramic wall tiles. It can be used for grouting
ceramic, porcelain, mosaic, quarry, natural stone, terrazzo and
terracotta tiles on walls and is available in a range of colours.

Application Data
Joint width: 1 – 3 mm
Working time (pot life) 2 hours
Set time 24 hours
Application Temperature Range: (+5°C) - (+35°C)
Application
Using a squeegee or a rubber float, apply the grout to a small area at a time. Completely fill the joints leaving no voids. Excess grout
should be removed immediately using a rubber float held at 90° to the tiles. This should be moved diagonally across the tiles to
prevent removal of grout within the joints.
When the grout has started to dry, the tiles should be cleaned with an emulsifying pad. This should be used in a circular motion to
loosen the grout residue. The tiles should now be wiped with a clean damp sponge until all residue is removed.
Packaging
5 kg polyethylene bags,3kg and 5 kg plastic bucket